The automatic capsule loading machine is sturdy, compact in design and simple in operation. It is labour and time saving. This machine is best suited for medium/small scale pharmaceutical units. It gives higher production at lower cost and better standards of accuracy.

Capacity: Fills 300-holes plate in 24 seconds giving an output of 3,60,000 capsules per 8-hour shift.

Advantages: Excellent cost benifit ratio. To fill standard size capsules. Can be handled by semi-skilled personnel. Low investment, high output.

Interchangeability:Interchangeable parts can be supplied for standard size capsules. Recommended interchangeability for optimum

Output: 00/0/1/2/3/4.

This is a most versatile capsule-filling machine suitable for all classes of pharmaceutical manufactures. It combines GMP design and construction. The equipment is simple to operate with no variation and with negligible rejection.
The STD-Model is made of non-corrosive metal with stainless 304 quality for all parts that come into contact with the filling powder.

Interchangeability:
Interchangeable parts can be supplied for all standards sizes of capsules. Recommended interchangeability for optimum

Output: 00/0/1/2/3/4/5.

Feeding Section: This section compatible with Stainless Steel Hopper and a Vibrator with powder collector. As the capsules pass through Vibrator some amount of powder get collected in the Stainless Steel Collector because of Vibration.

Inspection Section: This part of Machine compatible with a conveyor belt and vary speed drive. Above this part of machine there is lighting source to inspect the capsules minutely. The capsules move on the conveyor belt and whole moving they revolve around their axis due to angular guides. This total visual inspection can be undertaken by a operator to sort out defective capsules. The defective capsules are sorted manually by pluckers or by hand.

Polishing Section: This part of Machine compatible with two stainless steel chamber install with filter cloth, a revolving variable speed spiral nylon brush stainless steel powder collector and vacuum dust collector. The capsule travel from one end of the brush to the other end. During this travel they are subjected to roll in between the nylon bristles and filter cloth. On this course the powder on capsules and at the edge are polished twice i.e. in two chambers the powder settled at the edge of capsules also removed. The capsules coming out of the chute are throughly polished, glossy and clean.

This machine is most suitable for counting and packaging of capsules or tablets respectively. The machines design is very unique and extremely functional. The equipment is very simple to operate.

Operation: The operation is completely automatic, after the basic setup. The operator has to only replenish tablets or capsules whenever required. The operations are controlled by the electrical switches provided.

Changing over: Feed disc need to be changed to suit the shape and size of the product. Feed disc can be ordered with different numbers and sizes of pocket and can be interchanged in 5 minutes.

Capsule & Tablet Sizes:
Tablets 1/8" to 1/2" (3.175 to 12.7 mm ) dia.
or upto 1" long (25.4 mm), Capsules 00 to 5.

Output:
1000 Tablets/Capsules: 5 to 6 fills/min.
500 Tablets/Capsules: 5 to 10 fills/min.
250 Tablets/Capsules: 10 to 15 fills/min.
100 Tablets/Capsules: 25 to 30 fills/min.

"Nishelle Pharma Machines" has designed the printer for long run at high speed & easy handling. One operator can operate several machines. The entire operation of printing is automatic. The feed disk and the printing rollers is available in various sizes to obtain the highest efficient production.

This printing machine is suitable for printing any shape & sizes of tablets & capsules, such as round, oval, triangular, square, etc.

Operation: The operation is completely automatic, after the basic setup. The operator has to only replenish tablets or capsules and the ink reservoirs whenever required. The machine automatically feeds, positions, prints & ejects the said capsules or tablets. The operations are controlled by the electrical switches provided.

Changing over: Feed disc and gravure rolls need to be changed to suit the shape and size of the product. Feed disc can be ordered with different numbers and sizes of pocket and can be interchanged in 5 minutes. Gravure rolls can also be ordered with any imprint and these arematched with the pocket spacing on the feed disc. Roll changing requires just one minute.

Production Rates
(Depends on diameter or length of product)
Longest Dimension production/hr
7/32" (05.556 mm) 90,000 - 1,20,000
13/12" (10.319 mm) 70,000 - 95,000
11/16" (17.463 mm) 45,000 - 60,000
1" (25.400 mm) 35,000 - 48

The PCM-2 High Speed Automatic Capsule Machine is designed for faster production, accurate filling and less maintenance and cut in labour intensive.

The rectification of capsules (cap up and body down style) has been very much improved. The filling section in the machine has a variable auger and filling tables speeds to enable accurate and quality filling. The locking of capsules is done much faster by the new enclosed below deck closure mechanism.

The loading and the filling table have an automatic stopping system after completing a rotation of 360 degree revolution. Automatic positioning and return of the powder hopper.

We are engaged in exporting of different automatic capsule filling machine. The machine is ideal for filling capsules of various sizes with granules, powder and pellets. It is specially and skillfully designed to meet the precision production demands of modern pharmaceutical procedures.